Don't Be Misled Fumoto Plastic Hose Barbs and Their False Promises

I used Hydraulic hose fittings ( hose too ) because they are shorter ... Takes 15min to suck five gal from pigtail hose permanently attached to ... Scion tC 1G Drivetrain & Power - Removing stock Oil Pan? - In the process of Turbo, and was wondering, what's the easiest way to remove the ... If you don't that hot oil can collapse the plastic tube. 2, Make ... sucking machine' to the top opening of the dipstick tube and SUCKs. It sits much more flush and the threads extend less into the pan, which allows more oil to drain. The cons are that you need that hose ... Fumoto's little plastic lever lock was probably knocked off by ... sucking the oil out of the dipstick tube? Bill. 2019 Obsidian Blue ... ... sucking it out through the dipstick hole. Replacing the oil pan drain plug with a valve and hose-barb seemed like the answer. Fumoto of ... I was doing an oil change yesterday and was planning to swap in a Fumoto valve. Drain went great, no splashing, every drop in the pan. So I had a transfer pump and a large hose so I stuck the "suck" end into the fill tube on the engine. ... This is the hose and a 90 degree fitting ... and that tube is then used to suck ... making sure the inserted plastic tube is at the bottom. ... Use more 3/8" hose to attach the other barb and to the Mityvac, ... I run a VTA can and just replaced the valve with a hose fitting of the correct threads, boom done. I did it just for simplicity, one less ...