Optimize Fluid Handling with the Revolutionary Fumoto Plastic Hose Barb

I have a plastic tube connected to it and a plug in the end of the tube. ... It has a hose fitting on the end and I have a short piece of ... key to good flow is the rubber grommet and plastic line fitting ... You insert a plastic tube into the dipstick tube and feed it all the ... Have been using a "Fumoto" drain valve on my Honda Ridgeline for three years now and really like it. I slip a short hose on the nipple and just ... Scion tC 1G Drivetrain & Power - Removing stock Oil Pan? - In the process of Turbo, and was wondering, what's the easiest way to remove the ... ... suck it up. I. ... barbed hose fittings threaded into those. I had ... With a metal tank, perhaps some sort of plastic level (similar to a Weber float bowl gauge) ... The left tube sucks up the oil, passes through the pump and then into the 2 micron bypass filter from Amsoil. Upon going through the filter the ... The plastic retention clip on my Fumoto valve was missing. It was 100% installed last OC. Fortunately the valve itself remained closed. I have an 8” piece of old fuel hose I connect to the fumoto when ... I have the short version which comes with a plastic barbed fitting that snaps ... ... plastic housing with a socket, remove the paper filter insert and ... Sucks that it has only had 2 changes and already have to deal ... So I had a transfer pump and a large hose so I stuck the "suck" end into the fill tube on the engine. ... This is the hose and a 90 degree fitting ...