Unleash the Power of Fumoto's Plastic Hose Barb for Leak-Proof Connections

Sounds like you have a mismatch but even properly sized hoses can really suck. Kinda baffles me. I had a sailboat with an inboard and the ... ... rubber hose springs a leak all the oil is dumped in the bilge. look at the n series valves the have hose fittings. http://www.fumotousa ... hose here and suck out ... The extractor works by sliding a thin line down the dipstick tube (and into the pan) and then pumping the vacuum in order to suck the oil out. Swapped out filter and finish sucking out the rest by moving the hose around. Is it as fast as a Fumoto, doubt it. But I didnt have to jack ... The plastic retention clip on my Fumoto valve was missing. It was 100% installed last OC. Fortunately the valve itself remained closed. SH-10 - Straight Plastic Hose Socket 3/8" ID for S-type Valves| FUMOTO ... sucks all the oil out from the engine. This is by far the ... You then attach a piece of clear vinyl hose to the nipple of the Fumoto, and run the drain hose over and out the side of the engine protection ... Have one on my Dodge RAM, as factory drain bolt sucked badly. Works fine, no leaks. A bit on a slow side drain. Oh, and you can put drain tube ... I installed a Fumoto valve and now consider it to have been a waste of money. First, it has such a small diameter drain hole and tube that it ... The Ronin plug seems like a neat idea, esp. if you attach a hose to the outlet. I agree. If I hadn't already had the Stahlbus fitting (and ...