Empowering Mobility The Ultimate Guide to Universal Joint Replacement

They are original equipment u-joints. The propeller joint fits on the end of the cup. The other clips fit on the cup inside look at picture. An upgrade path would be to replace the driveshafts with heavier duty units that utilize u-joints, particularly a one piece driveshaft in the rear. First, try simply rotating the drive shaft back and forth by hand. If you feel clunking/play at either end, try to isolate/imobilize the other ... you can buy those replacement u-joints at dealer for that shaft. a non-service-able shaft has the u-joint that are secured by a press. the press ... Remove the C-clips at each U-joint. Spray the U-joint bearing cups with penetrating oil. With a BFH (big freakin' hammer) and a slug (I used an ... If you take it to a shop and have it done professionally it will run between 100-150 depending on where you go. It is really a no brainer to ... Using the online catalog database, MOOG® makes it easy to correctly determine a replacement MOOG universal joint part number. The rzr yokes are much softer material and bend easy. So using the bench vise method is better than a press so you don't bend anything in my opinion. Pull off the cap and bearing pins. Turn the shaft over and repeat, driving the other cap through the opposite side. Pull it, then remove the u- ... Use the ball joint / u joint press i linked to above, will take one longer to clean off the old yokes than it is to push out au joint with one of those tools.