Restoring Joint Health Universal Joint Replacement for Long-Term Benefits

The u-joint should move freely after installed. If it is tough to move by hand, you will get premature wear in the joint. It is good to measure ... An upgrade path would be to replace the driveshafts with heavier duty units that utilize u-joints, particularly a one piece driveshaft in the rear. 1. Remove brake components 2. Remove the bearing/hub assembly 3. Remove the u-joint from the main axle shaft 4. Remove the ball joints. I found the U-joint that is the replacement for the "un-replaceable" one that has forced people to buy a new driveshaft assembly. Go with Spicer 5-760x which is a superior u-joint that is more durable, longer lasting, and stronger than the Moog. You have to heat and heat to get all that **** out of there. If its properly done it will not bend the shaft. I have had to set it up in the ... 2003-2009 Nissan 350Z - prop shaft/ drive shaft U-joint replacement - As many of you know, the U-joints in the stock driveshaft are staked ... The pre 1947 Chevrolet & GMC Truck Message Board The 1947 - 1959 Chevrolet & GMC Pickups Message Board Projects and Builds Here is the procedure. Remove diff cover and drain. Remove the brake calipers and tie them up out of the way. Remove cotter pin and lock ring from the end of ... The U-joint is staked in and appears to have a cap diameter of 26mm or 1.024”x 80mm or 3.088” (ish). Anyone have actual dimensions? Or has anyone replaced one?