Amplified Performance Unlocking the Potential of Starter Motors

Trip the relay with this wire and power the relay from the battery lug on the starter. What causes it is all the bad connections (fuse block, ... Here's how a starter works to start the engine on your car. The car starter provides rotational motivation to turn the engine over to begin ... The motor will vary from 0.8kW (Alto?) to 3kW+ for heavier diesels (check in the Denso Catalog in the links given further). So the current drawn will be ... The starter solenoid is bad on my 966. It started several weeks ago clicking but not starting. It feels like the Ben fix is pulling in but the starter motor ... If the small terminals on the starter relay are unplugged and you still have the starter try to engage when you hook up the battery then the ... The purple wire going to the solenoid should get power when you turn the key to the start position. Did you check for that? The "parts changer" solution is to swap the relay w/ new or substitute a relay from another location. However this will not solve a wire fault. It clicks once then i lose all power in the truck. The only way to get the power back on is to disconnect the battery and reconnect it. the starter circuit is battery powers the starting switch which powers the solenoid on the starter which then feeds battery power to the starter ... 2011 Murano that will not try to crank when the starter button is pushed. All lights and gauges work. Battery has been load tested and new starter.