Starter Power Transformed The Engine's Ignition Revolution

2011 Murano that will not try to crank when the starter button is pushed. All lights and gauges work. Battery has been load tested and new starter. It's time to back-trace from the key switch on the column to the battery and see where there is a problem. It died, and when I hit the starter button, all the power shut off instantly. I figured it was a fuse, and I'd deal with it later in the day. As background when pinion starts to slide out, the contact in solenoid closes and sends power to starter motor. If pinion does not slide all ... The ignition switch activates the starter solenoid when turned to the “start” position, which then powers the starter motor. Neutral Safety Switch (for ... During the click at the starter the voltage only goes from 12.6 to 11.5. Now if the engine cranks over that power feed goes from 12.6 to 6.7 ... When the starter receives the electrical current from the battery, a small gear extends out of the starter and engages the vehicle's flywheel. The small gear ... It only works if i jump it at the solenoid. everything else ignition related works fine. and i get power in the large red/black wire from the ignition in the ... When you press your start button, the electricity goes thru your relay to your solinoid, which activates the pull in coil... What this coil does ... The starter is powered by the car's battery. If that's presenting a problem, check the battery, the fuse for the starter, wire to starter and ...