Revolutionize Your Approach with p0123 The Ultimate Game-Changer

A P0123 code means that the car's computer has detected that the TPS (throttle position sensor) is reporting too high a voltage. According to the service manual, first thing to do is check continuity between one of the pins on the throttle actuator control module and a pin on the ... The reference voltage should be 5V. The reading at idle should be .6V. The WOT reading should be above 4.0V, but when it goes above 4.75V, the DTC gets set. Code reads 0123 - Throttle/Pedal Position Sensor/Switch A Circuit High Input. Along with this code I have some downstream sensor circuit codes. After my friend replaced the oil sensor, my car started a few times, but it had a few almost no starts. Now it will not start. It sounds like the TPS sensor is bad. Here are instructions on how to change the sensor out in the diagrams below. It looks like it self- ... 2008 JK X threw the code P0123 so we replaced the throttle body and accelerator pedal sensor today. It ran great for most of the day then, the lightening bolt ... 16507/P0123/000291 - Throttle Position Sensor (G69): Signal too High. Possible Symptoms, Possible Causes, Possible Solutions. A P0123 trouble code means that the PCM has recorded a reading from the TPS that exceeds the normal 4.5 volts for more than two seconds. P0123, P0223, P2119 Codes. Inconsistent codes being thrown · 1) Turn off the lights, aircon, stereo or any system in the car that draws extra ...