Elevate Your Skills with p0123 The Ultimate Guide for Experts

Inspect the butterfly valve on the throttle body. If it is dirty, then clean with a soft cloth and some isopropyl alcohol. Verify that it has ... I am getting P0123 Throttle/pedal position sensor/switch A circuit high. I have been told first thing to do is clean electrical connections at either end. If you got coolant on the sensor that may have tripped the light for a little bit. It happened to me when I changed my turbo with my TGV sensors ... It states "P0123 Throttle/Petal Position Sensor/Switch A Circuit High Input." By saying that it is a high Input, that would mean that the problem cannot be the ... P0123 is for sensor 1. None of this has anything to do with the gas pedal. Check for a 5v reference to the throttle body. If you got that, then ... Code P0123 may be triggered when your car computer receives a signal from the TP sensor that exceeds the maximum limit for a set period. Comments Section ... Check your throttle body? ... Did you maybe unplugthe throttle body or is the harness/connector broken? Both DTC' point to a ... Turns out its P0123 (M) Throttle Position Sensor Voltage High Throttle position sensor input above the maximum acceptable voltage. CEL P0123 Throttle Position Sensor/Switch A Circuit High Input help Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo) Been getting "P0123 - Throttle Position (TP) Sensor Circuit High Input" lately during WOT. CEL comes on but resets when car shuts down.