Defeat Motor Deficiencies A Guide to Seat Removal

Found a way to do it without power. If you pull the side plastic cover and look towards the front of the frame you will find a square head fitting. So if you have electronic seat. and you need to move it forward, but you can't get power to it, the computer's not working. Whatever it may be, ... Each pull out seperatly , I took one off ran the motor and half the seat moved , did the other half and the whole thing moved again. Seems like ... There is actually two ways to take the seat out if the motor is dead. First one run the seat way up and remove the plastic panel facing the ... If you do this, once you pull the helix cable from the housing, you can clamp in a cordless drill and use the drill to perfectly align the seat. Pull the cable ends from the motors, take the longest inner cable out (Usually one of the recline cables) and slide it into the cable that moves the seat back ... If this video helped you save a ton of money, consider sending a ... – https://amzn.to/3L2RqwM 6 Pack Trim Removal Tool Kit – https ... from the car, but my fwd/back motor is dead!! Therefore I can't reach the rear bolts of the seat to remove it....The driver's seat works fine.. Often you can clear it by having someone in the back seat shove forward with their feet while someone else in the front rocks the seat and works ... While removing the seat and replacing the bad motor(s) or wiring is the long-term solution, using a winder tool (or power drill) as described in this article ...