Unleashing Seat Removal A Journey Beyond Motor Dependency

Luckily the motor died while the seat was in my driving position though it poses a unique problem. To remove the seat i can easily get at the ... Quite frankly I was amazed there was no death grip type of fastener on plug, just a plain slip in plug. ... If you are keen, why not remove the ... Ask the front desk at the yard if you can borrow a battery jump pack. If they allow that, you can get power to the negative and positive cables ... Hook up your charger to the posts in the engine compartment but do not turn on the ignition switch. Using this temporary power source, you can then cycle the ... Another way is if you have a lawnmower battery fully charged, that should be enough to do what is needed. You just need a substitute battery. As ... I went to remove my drivers side Power Bucket seat & the motor does not work. I was able to remove 4 of the 6 nuts holding the seat down ... Funny I was just searching to see if there's a better method of removal but I think the only way is to make the seat go as high as possible - ... Use a socket with a short extension. By turning the nut(s) you are just manually turning the motor gear to move the seat. It's a Lexus, these ... Found a way to do it without power. If you pull the side plastic cover and look towards the front of the frame you will find a square head fitting. Just make contact for a second, then try reverse polarity. If the motor is good, it should jerk or operate one of the seat's parts. If you are ...