The Art of Seat Removal Dealing with Motor Failure

I went to remove my drivers side Power Bucket seat & the motor does not work. I was able to remove 4 of the 6 nuts holding the seat down ... This post is about how to remove the seat when you have no power. It's basically about exposing the 4 seat mounting bolts so they can be removed. So I need to remove the driver seat. Currently there is no power to the motors that adjust the seat, so the covers for the front seat bolts ... Here's how to quickly and EASILY remove GM power seats in the junkyard, to replace your blown out ones. This ... Motors Facebook - https://www. check to motor under the seats , its probably dead, it pulls out, so fairly easy to test when out, there will be two rods that come out of it ... I was at a salvage yard once and was getting some seats out of the Car, when I paid for them the fellow asked why I didn't get he drivers seat, ... Do a search...this issue has been discussed many times including fuses, tapping and replacement. Bottom line is that if you continue to blow ... Pull the cable ends from the motors, take the longest inner cable out (Usually one of the recline cables) and slide it into the cable that moves the seat back ... The seat will only move if powered. Normally, you power the seat forward, remove the two back bolts then power the seat back to remove the two front bolts. Or even how I can get the seat out if I can't get to the two front bolts and the motor is dead. Before I took the car to the specialist I did ...