Transform Your Listening Tweeter with 2 Immersive 4-Ohm Speakers

Delivery. Free 2-4 day shipping. Fri, Jan 10 - Mon, Jan 13. From Ohio, United States ; Returns. Seller does not accept returns. This item is covered by eBay ... Unlikely. For low frequencies (ie below 500 Hz) the tweeter arrangement will have a relatively high impedance and therefore will not affect the net impedance ... But the way they are wired to the stock amp is in parallel, generating a 2 ohm load per channel. correct. I plugged in the tweeter so you get the correct ... The amplifier really won't "care". If you're doing your own crossover, just remember to use the correct values of C (and/or L) for a four ohm ... The general advice would be that it's fine to connect speakers with a higher impedance to an amplifier capable of operating with a lower ... I have 2 tweeters hooked up and they are both connected to my 4ch amp. They are both on the same channel of the amp and I am wondering if ... Also, changing the impedance will affect the crossover between the tweeter and mid, which are not wired in parallel, but through a crossover. If you put in a ... I had to JL 12's that could outpound people with two to three times as much power, because they crisscrossed ohms, had the cap up to much, or ... Capable of handling a crossover frequency as low as 2,000 Hz (@ 12 dB/octave), the TD25F-4 makes a great choice for use in compact 2-way designs. Product ... Actually, if you put a 4 ohm speaker load on a 2 ohm amp, your going to cause a lot of havoc on your amp. If your impeadence doesn't match, its ...