Experience Precision Audio Tweeter with Dual 4-Ohm Speakers for Unmatched Sound Quality

... loudspeaker enclosure. Dayton Audio AMT (Air Motion Transformer) tweeters use groundbreaking transducer technology from the original ESS/Heil Air Motion ... The general advice would be that it's fine to connect speakers with a higher impedance to an amplifier capable of operating with a lower ... The correct way to do that is to use a two way crossover that both the woofer and tweeter are connected. I've been running my subwoofer at 2ohms for however long and Tonight I decided to switched it to 4ohms (running only one of the voice coils) ... 2: Each speaker no more than 4 inches if I could help it. 3 ... BONUS: 5: Use 4ohm speakers for power efficiency. I tried to learn ... 6-1/2" - 2-way, 340 W Max Power, Aramid Fiber-reinforced IMPP™ cone and 20mm Tweeter - Coaxial Speakers (pair) Add to compare. Unlikely. For low frequencies (ie below 500 Hz) the tweeter arrangement will have a relatively high impedance and therefore will not affect the net impedance ... Also, changing the impedance will affect the crossover between the tweeter and mid, which are not wired in parallel, but through a crossover. If you put in a ... If you try a different speaker with a different impedance it will not sound the same, the crossover was designed for the original speaker. If ... My idea was to link all the speakers and tweeter in parallel thus reducing the speakers to a 4 Ohm load and getting the full power out of the amp.