Transform Your Music Tweeter for 2x 4-Ohm Speaker Systems

3. Compatibility: A 4 ohm tweeter is highly compatible with a wide range of amplifiers and speaker systems. Whether you're using it in a home theater amplifier ... Yes. 2 4-ohm woofers in series, and an 8-ohm tweeter, would be just fine. What you have to understand is that the resistance you measure with your multimeter ... If you use a 4 ohm woofer with an 8 ohm crossover, the crossover point will halve. The result of using 4 ohm components with a 2-way 8 ohm ... @wildbill2020 you can use the 2ohms on the front doors and dash, you just have to make sure you hook them up in serial for a 4 ohm load and this ... I believe the stock tweeters and door speakers are both 4-ohm. When wired, in parallel, normally this would be a 2-ohm load, which would not be ... Unlikely. For low frequencies (ie below 500 Hz) the tweeter arrangement will have a relatively high impedance and therefore will not affect the net impedance ... As was stated, just wire each speaker to an individual amp channel. You will get a little more power compared to the 4 ohm spec and a little ... The proposed USB cable was in response to "...is there any way to use 2 usb 2.0 or 3.0 ports together,like cables to each,then cable becomes ... A 5.25 inch speaker will not put out much bass as a subwoofer. And a 2 inch tweeter is only going to output a moderate level of midrange sound ( ... If so, then do they have 4 ohm door speakers (4), 4 ohm tweeters (2), 2 ohm center (1) and 2 ohm subwoofer (1)? Are you saying that the 7 ...