Discover Why Fumoto Plastic Hose Barb is a Nightmare

To use a Fumoto valve on the 2.7, you would need an adapter with a spiral groove on one end and threads on the other end. The size is 16mm-1.5, and there's a Fumoto valve with hose adapter that fits: ... Plan B: I inserted a 3/16" hard plastic tube (vacuum tube) ... The plastic belly pan doesn't have a huge hole around the engine oil drain plug, so getting a fumoto with a hose barb probably isn't a bad idea. Fumoto vavles with the short nipple and the snap on coupler ... I did find barbed hose adapters for the M10x1.25 thread, so at least ... I used Hydraulic hose fittings ( hose too ) because they are shorter ... Takes 15min to suck five gal from pigtail hose permanently attached to ... ... rubber hose springs a leak all the oil is dumped in the bilge. look at the n series valves the have hose fittings. http://www.fumotousa ... hose here and suck out ... When I installed my Fumoto F106N valve, I didn't take the time to get a hose, or even measure the nipple diameter. I am going to be doing my ... With the plastic drain plug, I doubt there is a Fumoto valve available that would fit the 2.7 or 3.5. Not sure about the 5.0. Dec 14, 2017 | 02: ... Found that it was a pretty good idea. While reading some posts, I didn't really read one that said go ahead, it's incredible, it's safe ( won't open by itself ) ... Used the provided plastic straw inserted down the dip stick tube. ... Then one day I noticed the extractor hose fitting on the various ...