Transform Your Fluid Transfer System with the Elite Fumoto Plastic Hose Barb

Sounds like you have a mismatch but even properly sized hoses can really suck. Kinda baffles me. I had a sailboat with an inboard and the ... ... suck some of the oil from the hose back into the system. No harm ... 40/20/40 seat conversion, Fumoto drain, Pre OEM secondary fuel ... I went parts shopping and got a pump, fittings, hose, but no check valves. I did find some 3/4" NPT, but it was going to take 3 bushings and a barb fitting to ... The supplier said he has been draining his oil for years with a 12V pump by inserting a plastic tube into the sump via the dipstick hole. The hardest part was tightening the hoses to the base where the old filter was. Do yourself a favor and make sure you have an open end wrench, ... ... Fumoto oil drain valve(not really a mod, more for convenience). ... The plastic tube and airbox have residual chemicals on them used to ... ... plastic cover instead of going everywhere. I've seen similar ... Just stick a hose inside and suck out the oil. It's cleaner and gets ... NEIKO 20762A Oil Drain Pan | Black Plastic Anti Splash | Motor Oil Drip ... Getting the fittings and hose with this model is a waste bc they won't fit ... I finally hooked up my Reverso to my MG-502 transmissions using 5/8”-18 drain valves from Fumoto and 3/8” fuel hose from Amazon. The extractor works by sliding a thin line down the dipstick tube (and into the pan) and then pumping the vacuum in order to suck the oil out.