Fumoto Plastic Hose Barb A Cautionary Tale

without a drain hose, I'll be sucking the oil thru the dipstick tube. ... Supposed to have a drain hose with threaded fitting but need to confirm ... I'm going to build a "custom" oil catch can, and I need to buy fittings. Can someone confirm the inner diameter of the OEM PCV hose? I run a VTA can and just replaced the valve with a hose fitting of the correct threads, boom done. I did it just for simplicity, one less ... but if you note the 05 up performance brand has plastic ... Also, the drain on these Mishi rads sucks. It ... I added a Fumoto valve to mine with a 3/8" hose barb ... It would suck to break that fitting off and lose your oil !! Reply 0 ... I have the Fumoto valve (the one with the lever). 7/8" w ... I'm trying to decide whether to order the straight or 90 degree hose barb for a drain valve. It's a 2.5i. Cheers, -Hirsch "Live your life so that when you ... Used the provided plastic straw inserted down the dip stick tube. ... Then one day I noticed the extractor hose fitting on the various ... ... rubber hose springs a leak all the oil is dumped in the bilge. look at the n series valves the have hose fittings. http://www.fumotousa ... hose here and suck out ... ... tube' using the supplied rubber compression fittings. It seems to me that one would be able to do a more complete oil change by sucking oil ... The 20baja outlaw has a sweat set up, when you pull the drain plug far enough, the hose from the pan is connected to it. Just remove the fitting ...