The Ultimate Guide to Universal Joint Replacement Questions Answered

I am trying to replace a bad u-joint. i have done u-joints in the past but not on this truck so i expected to just be able to pound them out and install the ... Using the online catalog database, MOOG® makes it easy to correctly determine a replacement MOOG universal joint part number. in the process of replacing old and worn parts we decided to replace the U-joints as well, now heres the question. ive been trying to remove ... The u-joints on the cars are considered non-replaceable. if you look closely they are prick punched in and not held in with snap rings. i have ... Hello, is-it possible to replace only the U-joint ? Do i need to buy the complete driveshaft if my u-joint is worn ? You have to heat and heat to get all that **** out of there. If its properly done it will not bend the shaft. I have had to set it up in the ... First remove the driveshaft by unbolting the u-bolts from the pinion yoke. There is 4 bolts. next pull out the axle and chances are the u-joint will fall out ... datzenmike ... I would say $15-$20 for a good one. Try to get the ones that come with the grease nipple. As for using cheap ones.... just figure ... Just take off the U-joint using a 7/16 wrench. Slide the drive shaft out off tranny. Remove retainer clips with flat screw driver. Set the drive shaft on the ... I've pushed them out using a vise and sleeve but that's a tough tricky way to do it. Damaging or tweaking the yoke is the big hazard doing it without a press ...