Pain Relief and Mobility Restoration The Transformative Power of Universal Joint Replacement

The only way to know what specific joint you need for your truck is to remove the ones you already have and measure them. Then purchase the ones that measure ... That video is pretty much how it's done - using a socket that matched the ujoint diameter a hammer and a big c-clamp. Some will have inner or out clips holding ... The first step in replacing a universal joint is safely readying a truck for maintenance. This means removing keys, chocking wheels and, in this case, raising ... I managed to replace the drive shaft assembly myself and saved $800 to boot. It's all assembled and pre-balanced. Just take off the U-joint using a 7/16 wrench. Slide the drive shaft out off tranny. Remove retainer clips with flat screw driver. Set the drive shaft on the ... Go with Spicer 5-760x which is a superior u-joint that is more durable, longer lasting, and stronger than the Moog. U-joint replacement can be an easy DIY repair. A large vise or other press or hammer and large punch can get the job done. I'd take the joint out and remove the cup that doesn't have the C-clip on it and see what it looks like. If the cap won't go on enough to put ... If you take it to a shop and have it done professionally it will run between 100-150 depending on where you go. It is really a no brainer to ... Pull off the cap and bearing pins. Turn the shaft over and repeat, driving the other cap through the opposite side. Pull it, then remove the u- ...