Minimally Invasive Techniques Universal Joint Replacement with Reduced Recovery Time

There are no "U-joints" on Subaru drivetrain. U-joints always come in pairs to counteract the rotational acceleration/deceleration inherent in the design. datzenmike ... I would say $15-$20 for a good one. Try to get the ones that come with the grease nipple. As for using cheap ones.... just figure ... Two mechanics have said it's the u joint, but don't worry about it. The last one said there's usually a little play, but that the sound is normal on an older ... I'd take the joint out and remove the cup that doesn't have the C-clip on it and see what it looks like. If the cap won't go on enough to put ... It's not a hard job -- I replaced them on my '92 F-150 a while back -- but thought I'd ask for tips and cautions that might not be referenced in the manual ... Are you hearing clicking or clunking noises when driving? Come in to Meineke for a quick U-joint replacement. Schedule your appointment today. After searching the forum I can't find too much info on driveshaft, specifically u-joint replacement. I recently replaced rear tires, wheel ... I managed to replace the drive shaft assembly myself and saved $800 to boot. It's all assembled and pre-balanced. First I will say that I'm no expert on replacing U-joints. I read enough posts suggesting that it was possible to do it on the vehicle that ... U-joints to use would be Spicer's 5-1310x for the driveshafts. For the front axle shafts, you want Spicer 5-760x u-joints. Both of those are ...