Shield Your Vehicle from Damage with CV Boot Replacement

To replace the outer boots you have to remove the inner CV joint. It's really messy, but the good news is that you don't have to mess with the ... If you have a leaking cv boot there are these split cv boots you can use to replace them. you can basically wrap the cv boot around and glue it ... I would say: if boot is only recently torn, axle is not “clicking” and no dirt made its way inside, it is a good change that replacing boot only ... The axle fits into the transmission of course. If your boots get even a pin hole they will sling grease all over the underside of your motor/ ... If you inspect it, you will see that it is just there as a support for the rubber boot. It does not have to be perfect, just round enough so ... I recently did the rear end and noticed that the CV boots need to be changed. Autohaus only has the outer boot kit. From there, you remove the inner CV joint from the shaft allowing you to replace both boots. Add additional grease as needed, then button ... I rolled the baggie around the axle - Ziplock end toward the outer CV joint (this gives you something to grip onto when pulling the boot on). Name: 33 inner ... The inner CV joint is fine.. I think. The outer one is bad because the boot is torn. I wish I had known to check boots when I change the oil so I woulda ... My mk7 has 75k. I'm going to diy it and I'm wondering if it's worth the trouble to replace just the boot or if I should do the whole axle ...