Ultimate Guide to Timing Cover Removal Avoid Common Pitfalls

NOTE: It is not necessary to remove the water pump or the coolant outlet housing for engine timing cover removal. 16. Remove the twenty-two M6 bolts (3) and one ... Loosen all of the valve cover bolts and leave the valve covers on you will have no problems I promise. The Upper Oil-Pan should be adjusted/aligned to the rear engine cover, otherwise it might lead to some strange reverb sounds. I'm having trouble removing the timing cover and just need some assistance in properly removing it without removing the engine mount and lifting/supporting the ... VQ30DE - Timing Cover Removal Tips ... Have you removed all of the bolts that it takes to remove a VQ30DE timing cover? There are two bolts hiding ... The procedures to replace timing chain in FSM call for removing/lifting the engine with a hoist, plus power steering pump. The pan will need to be dropped. Good thing is that the pan gasket is the re-usable kind, so drop it down a little and put it back up when done. One tip was spray the dowel pins with penetrating oil as they may have corrosion and if the cover is not taken off evenly it may crack. 1: Remove coil covers and coils (Might want to remove plugs, not if you are careful) 2: Unbolt cam covers and support somewhere in the center to raise it off ... Removal concepts for a timing cover discussing gasket requirements. This is not a full removal tutorial as those already exist.