Automotive Ignition Unleashed The Power of Starter Motors

Share your videos with friends, family, and the world. Comments70 ; Episode No.127 - The Starter Motor. How a Car Works · 913K views ; Starter Motor and Ignition Circuit Thoroughly Explained! DIY ... During the click at the starter the voltage only goes from 12.6 to 11.5. Now if the engine cranks over that power feed goes from 12.6 to 6.7 ... The first test is to take a piece of wire and jump between the big terminal from the battery on the Starter relay (often called a solenoid) to the littl ... If I jump power to solenoid the starter turns the engine fine. Follow the solenoid lead back to the fuse block under hood and it is on a plug with one other ... If there is no power to the small solenoid wire then you need to test the starter relay, the contacts inside the relay could be dirty. This video explains the working of a starter motor with relevant animations. The starter motor model shown here is a pre-engaged type ... The remote trigger presumably uses the battery for its power source, bypassing the ignition switch. Try a voltmeter on the S terminal of the ... John76 ... Make sure the Black/white wire is connected to the #50 tab on the starter... not the #15 tab. You can connect the Red/black wire to the ... Try running a heavy enough gauge wire from the starter solenoid relay to the purple wire connection, then try starting. This would rule out a ...