Starter Power Optimization The Key to Reliable Engine Performance

The "parts changer" solution is to swap the relay w/ new or substitute a relay from another location. However this will not solve a wire fault. When you press your start button, the electricity goes thru your relay to your solinoid, which activates the pull in coil... What this coil does ... A starter is a device used to rotate (crank) an internal-combustion engine so as to initiate the engine's operation under its own power. the starter circuit is battery powers the starting switch which powers the solenoid on the starter which then feeds battery power to the starter ... During the click at the starter the voltage only goes from 12.6 to 11.5. Now if the engine cranks over that power feed goes from 12.6 to 6.7 ... This video explains the working of a starter motor with relevant animations. The starter motor model shown here is a pre-engaged type ... You will need to locate the start wire on the engine harness, normally located near the starter or on the starter it self. here is what you have to connect to ... If the small terminals on the starter relay are unplugged and you still have the starter try to engage when you hook up the battery then the ... Share your videos with friends, family, and the world. IF you want to check the starter, put a jumper wire on the big terminal where the battery voltage comes in (or constant power), and touch it to ...