DIY Tie Rod Boot Replacement Save Time and Money

It is possible to replace just the boot. All you have to do is take the tie rod end off and slip on a new boot full of grease, then clamp it down. the boot should be filled with a grease, like wheels bearing grade grease. you can buy repair kits if the only thing torn is the boot. they just ... I show how to replace the boot on the steering rack without having to pop the outer tie rod ends by unscrewing the inner tie rod from the ... If you replace the tie rod ends the new ones will most likely come with Zerk fittings - don't over-grease them and blow the new boots. outer or inner tie rod?? You can replace the one side you ripped. Unless that tie rod is greasable, you're better off just replacing it. Those boots do not keep out moisture and grit, so it'll fail in short order. I'm going to talk to the dealer-I was pissed they couldn't fix their own product and then sent me out to a 3rd party shop instead of subbing the ... I was a Service Manager for and Acura dealership. Also an ASE master tech. Put the boot in hot water for a few minutes. This will soften the ... Do you have a torn boot or are they leaking? If it's torn, replace it. If it's leaking, you need a power steering rack. Those boots aren't ... This wall take the entire boot of with it. You can try to use a socket and place it over the bottom of the tie rod so that it just catches the ...