Elevate Your Automotive Skills Replace Tie Rod Boots with Ease

You cannot replace just the boot, you have to replace the drag link end. This is probably a wear and tear type item and it is probably not covered under ... I would not suggest trying to remove and use an old boot, the replacement is likely old and dry rotted as well, it will probably tear when ... An experienced tech can easily tell any noticeable wear, but yes, up on the hoist is necessary. Is this a shop you trust? You may be able to ... A boot comes on all the parts with a pivot joint(some exceptions). What new parts do you have in your posession? If you're planning to replace ... If there's no play in the joint itself I wouldn't worry about it right now. It's just a dust boot. Really some inner rods are a pain and then ... Well... finally got the sucker figured out. The driver's side was a HUGE PITA... I ended up pulling the boot over a bottle in the garage, ... Clamps can be popped off easily without the right tool and then just use zip ties. I know the last rods I replaced, the boots were all ... Congrats - we all knew you could do it. Enengy Suspesion makes ball joint boots too. However, if your old ones are still in tact, I'd leave them ... Yes you can buy just the boots. I would replace it with a tie rod from a V8 ZJ. I spent $20 on mine from a junk yard and have beat it pretty ... To replace the inner tie rod you start by removing the outer tie rod (end). In order to change the iinner tie rod without removing the rack you need a ...