Redefine Vehicle Performance Replace Tie Rod Boot with Precision

The wire clips for the most parts are just added insurance and not required for most cars. The clips also prevent the rubber boot from falling ... This will show how to replace a tie rod boot or the tie rod itself as the procedure is the same. I noticed that I had a bit of grease on the disc cover plate ... If you need to replace just the boot, because it cracked due to age, and the tie rod joint itself, is still good, I'd look into an Energy ... It is okay, but you are getting dirt in the joint but should not cause a problem for some time, probably would not want to run it past next winter. To replace the inner tie-rod boot, you will need to release outer tie-rod end from knuckle, and remove the outer tie-rod end (release locknut and turn off). This video will show you how I replaced the damaged inner tie rod end accordion dust boots on a 2002 Toyota Avalon. Now I have a inner cv boot that is completely destroyed. I got the shaft back in. Do you guys think I can just replace the boot or am I going to ... When I first got my Legend a few months ago, I noticed that those inner tie rod boots were torn. You can pick them up at autozone for about $20 ... The boot needs to be on there to keep the road dirt and debris out of the joint. I would probably try using a plastic dash tool to pop it over ... There's no need to replace the boots. Its to protect debris and water from going in there but if you are living in an area with those conditions ...