Master the Throttle A Step-by-Step Guide to Resetting Your TPS

Push this button while holding down the RESET switch on the Controller. Hold down RESET until “NVRAM CLEAR” appears in green letters on-screen ... Disconnect you throttle cable from the thumb throttle. Disconnect the battery wait 2mins. Reconnect the battery restart quad let run till it idles down. It's essential to understand the importance of the throttle position sensor (TPS) in maintaining proper engine performance. The TPS provides real-time feedback ... If your oxygen sensors have failed or need to be serviced, check out our rental tool options for an oxygen sensor socket set from O'Reilly Auto Parts. Show ... "Discover step-by-step instructions on how to reset the Throttle Position Sensor on a Honda. This comprehensive guide covers popular models ... Turn Key to "off" position (dont remove the key) and then release the gas pedal. than wait at least 2, if not 3 minutes, for the system to reset ... A quick description of how to reset the TPS (Throttle Position Sensor) on your motor to the factory default setting. A KTM 350SX throttle ... turn key on, wait for dinging to stop, a few seconds, push throttle pedal slowly to the floor, then let off quickly, turn key off. Repeat this ... TPS reset and a well tuned ECU could be the answer to your bike running lean/rich. The following procedure must be performed: a. Disconnect negative battery cable from battery. Leave cable disconnected for approximately 90 seconds.