The Ultimate Guide to Conquer Stripped Lug Nuts Expert Techniques

A tire shop had rotated my tires and installed them back on my SUV with an impact wrench. The impact wrench torqued on the lug nuts overly ... Don't remember seeing that guy -- but I probably will not go back to that shop for my next winter tire swap. I'm going to remove all lug nuts ... Liberally apply penetrating oil to the lug nut. For open-ended acorn nuts, spray both the open end and the wedge-shaped portion at the wheel. Allow at least 10 ... Well, a nut-splitter won't work. :frown2: I guess next I'd try heating it with a pencil-flame torch and using a chisel and hammer. Find a socket slightly smaller than what's on the car. Hammer the smaller socket on to the lug nut then use a breaker bar to take it off. Hammer the tool toward the bottom until the cover splits. Then remove the cover like peeling an onion. Lastly find a socket that fits the inner ... If you have stripped the hex faces, you can try a smaller socket and get it on with a hammer. So if your car has 19mm lug nuts and the nuts ... You can poke a hole through the top of the center of the lug with a hammer and screwdriver then use needle nose pliers to rip and shred the rest of the cap. if not any auto parts store should sell striped nut remover kit. these have saved my butt several times. If it aint square, I don't care. 84 C35 ... Just drill the center of the stud out from the nut side. I personally drill a pilot hole and then grap a drill bit a little bigger than the stud ...