Stripped Lug Nut Removal Simplified A Step-by-Step Guide for Success

They make some lugnut removal sockets for stripped lugnuts, give them a try. What's up guys in todays video I will show you how easy is to remove a stripped lug nut with this tool Amazon link - https://amzn.to/3P1TQ1Z ... Don't remember seeing that guy -- but I probably will not go back to that shop for my next winter tire swap. I'm going to remove all lug nuts ... You put the socket on the end and then hold it on the bolt, importing a bit of left torque to it, then smack it with a sledge. You might try a ... Also, you can get a die grinder with high speed carbide bit and cut the nut apart. Then you can split it and remove it. I had to do this before ... Where you are stuck, just grind a flat spot on the stud to start drilling away the stud. 1Hour and the job will be done... Start with good ... Well, a nut-splitter won't work. :frown2: I guess next I'd try heating it with a pencil-flame torch and using a chisel and hammer. If you tighten the other lug nuts down then it should relieve pressure on this mangled one.. allowing it to come off easier. Try a smaller ... Your problem nut could be stripped because it might have been put on crooked with an air gun. Not fun to take off. If the cap was rounded, it would pull right ... You can poke a hole through the top of the center of the lug with a hammer and screwdriver then use needle nose pliers to rip and shred the rest of the cap.