Stripped Lug Nuts, No Problem The Ultimate Guide to Effortless Removal

If a lug nut extractor is not available, you can use a hammer and chisel as an alternative. Position the chisel at an angle on the edge of the ... In this video I show how to remove a stripped lug nut from your wheel. Where you are stuck, just grind a flat spot on the stud to start drilling away the stud. 1Hour and the job will be done... Start with good ... Just drill the center of the stud out from the nut side. I personally drill a pilot hole and then grap a drill bit a little bigger than the stud ... Get one of those lug studs (technically, they're lug bolts) and also get an open-ended M12x1.25 nut (lug nuts for Subaru steel wheels would work ... when you get the lug removed, you do NOT want to tap it out. tapping is really, a last resort, as it removes metal. what you want to use is the ... Get the other lugnuts removed and then put a prybar between the wheel and the hub. Pry outward as you try and loosen the nut the rest of the way. I have used an impact, lug wrench, 1/2" & 3/4" drive ratchets with sockets, to draw the new stud in. And, I never stated to EXTRACT the the stud ... Get an Easy Out (I could not find one deep enough to fit the lug bolt, so I made my own) and have it welded to the socket you remove the lug ... You can poke a hole through the top of the center of the lug with a hammer and screwdriver then use needle nose pliers to rip and shred the rest of the cap.