Empower Your Knowledge Ultimate Guide to Removing Stripped Lug Nuts

if not any auto parts store should sell striped nut remover kit. these have saved my butt several times. If it aint square, I don't care. 84 C35 ... Take a smallish flat blade screwdriver and a hammer. Punch the screwdriver through the end of the nut with the hammer. Keep working away with the screwdriver. Well, a nut-splitter won't work. :frown2: I guess next I'd try heating it with a pencil-flame torch and using a chisel and hammer. Slowly, half turn at a time try to get the lug nut to grab any thread that is left (in an attempt to remove it). Of course if the stud itself ... Here is how to remove a stripped lug nut and get back on the road quickly, what are the types, and how to avoid this situation altogether! So we'll just start hitting it. And then it goes. Now in this case, there's not enough room for the stud to go through. So here's a trick. Get a ... Before you do anything though spray the nut and the area around it liberally with penetrating fluid like WD40. Do that several times and give it ... They make sockets specifically for rounded lug nuts, they have spiral groves on the inside, and are supposed to grip the nut enough so you can ... If that didn't work, I hammer a slightly larger socket onto the lug then use a breaker bar with lots of Kroil on the lug. Never had a problem ... Essentially, it's like an extractor socket, but not as aggressive. Teeth as extractor socket. There's a part number. Usually they're sold at o' ...