Stripped Lug Nuts, No More Discover the Ultimate Removal Guide

I was able to loosen 3 with the spare tire jack's wrench. And that was only by standing on it. Needless to say, I'm pissed. Second is to plug-weld a new nut onto the end of the old nut and then use the new nut to get it off. That always works since the welding heat ... So we'll just start hitting it. And then it goes. Now in this case, there's not enough room for the stud to go through. So here's a trick. Get a ... I use socket 1mm smaller, if they rust and bulge 1mm bigger. sometimes a SAE size also works if you need to split the mm. Essentially, it's like an extractor socket, but not as aggressive. Teeth as extractor socket. There's a part number. Usually they're sold at o' ... Since it's a tuner lug take a drill and go up in size little by little in like 30 minutes you will remove the head of the lug and the wheel will ... Liberally apply penetrating oil to the lug nut. For open-ended acorn nuts, spray both the open end and the wedge-shaped portion at the wheel. Allow at least 10 ... Remove wheel (or other spacer) and check to see if nut is loose. If not, use large punch and hammer on back of hub to push stud back forward ... In this video I show how to remove a stripped lug nut from your wheel. Use a junk socket pound on onto the lug nut then use a ratchet to remove it works all the time. 2006 SRT8 Black Option Group I, II,III,Sun roof, ...