Effortless Stripped Lug Nut Removal Uncover the Secrets of the Pros

Pound the socket over and down onto the threads on the lugnut. Now the socket is pounded onto the socket you can remove the lugnut. It might be ... Just drill the center of the stud out from the nut side. I personally drill a pilot hole and then grap a drill bit a little bigger than the stud ... We just put vice grips on the back of the studs (TWO of them!) that were spinning in the hub. Used an air ratchet and the lug nuts backed right ... Also, you can get a die grinder with high speed carbide bit and cut the nut apart. Then you can split it and remove it. I had to do this before ... You put the socket on the end and then hold it on the bolt, importing a bit of left torque to it, then smack it with a sledge. You might try a ... Fortunately, I was able to remove all, but 1, by driving a slightly smaller socket on there and after I had the lug nut broken loose and turning ... If it's a stripped nut then just replace it and possibly the damaged stud. However I believe you have mistaken the terms nut and bolt. A ... Like it's stuck on the stud in the hub? Hammer a smaller socket on and try to get it off with a ratchet. Or just remove the stud totally and ... Liberally apply penetrating oil to the lug nut. For open-ended acorn nuts, spray both the open end and the wedge-shaped portion at the wheel. Allow at least 10 ... You can drill a hole in it and use an "Easy Out" bolt remover. It's basically a counter-threaded bit - you twist it into the hole counter- ...