Effortless Removal Detaching Crimped Fuel Lines with Ease

Any tricks to share for removing Oetiker-style hose clamps? I need to remove the old high-pressure fuel line, and tried various pliers combinations today with ... I am changing out the petcock. It is one of those crimped clamps and I am having a hard time cutting it free. Bought some end cut pliers but ... PEX Lines, Tools & Accessories · Radiant Manifolds · Floor Plan Submission · Parts & Accessories · View All Parts & Accessories · Igniters and Dual Fuel Burners ... I was worried this would either pinch/tear the hose or damage the fuel line. My solution to this was to purchase a battery lug crimper which has ... C'mon man, you could replace the hose and the clamp for less than $2.00 probably. ... I would look at all hoses and fuel and vacuum hoses. Best way to crack them loose is to grab the hose with a pair of pliers an see if you can get it to rotate on the fitting, then try to horse it off. Yes you can cut & peel off the outer shell. It likely attaches to the tube, like a Coll-O-Crimp. If so, just cut it away from the tube. For ... Pinch hose clamps look like a metal ring with square-shaped holes in them and a protruding metal ear, which creates tension on the tubing when crimped. Cut the rubber hose off the quick disconnect fitting and cut the metal crimp end off. Use high pressure hose and high pressure clamps to ... It can be a challenge to remove the fuel line from the filters, and that a spreader tool can help. And I would also need some sort of clamps to pinch the fuel ...