DIY Magic Removing Crimped Fuel Lines Like a Seasoned Pro

Best way to crack them loose is to grab the hose with a pair of pliers an see if you can get it to rotate on the fitting, then try to horse it off. Question that I haven't found an answer in searching the forum - what kind of crimping tool works on fuel line crimp clamps? Specifically, would ... Once the ring is split, it can be bent away from the injector. Either the FI style hose clamps or Oetiker clamps will work. Oetiker's may take a ... Grab the pinch point and twist it off until it breaks. You could use channel locks or anything you got to get a good grip. Swaging is where a metal collar is crimped over the hose instead of using a hose clip. ... This can be done by removing screw in hose tails and ... I am changing out the petcock. It is one of those crimped clamps and I am having a hard time cutting it free. Bought some end cut pliers but ... Cut the rubber hose off the quick disconnect fitting and cut the metal crimp end off. Use high pressure hose and high pressure clamps to ... A strap wrench should be able to easily take the filter off. Any tighter than that and it is too much. If you bent the line that goes from the ... Just grab the raised portion and twist back and forth. It'll separate and you can pull it apart. Get the fuel injection hose style clamps to reinstall. Hi everyone. .anyone have a good method of removing the metal crimped clips off of hoses.. ... The clips are re-usable, very common on fuel lines