Unveiling the Secrets A Practical Guide to Removing Crimped Fuel Lines

I was worried this would either pinch/tear the hose or damage the fuel line. My solution to this was to purchase a battery lug crimper which has ... A crimped fuel line could cause momentary lean issues while the engine is running with a more open throttle if it crimps the line enough to drop ... These copper sleeves are all ready inside the hard line hose so no need to put one in- just pop the new hose over it. Just need to slice the ... Removing the fittings off the existing fuel line may be difficult. Simply heat the line to allow it to soften then proceed to removing the ... Tool Review In today's video, we'll be looking at some various tools used to remove fuel lines, ranging from expensive OEM tools, ... Question that I haven't found an answer in searching the forum - what kind of crimping tool works on fuel line crimp clamps? Specifically, would ... Put the hose end against something flat and push- like you're trying to force the hose back through the fitting. The key is the ferrule must come out. Anything that might need removing should be able to be disconnected using a screw or nut driver. Who thought it was a great idea to use zip ties ... Pinch hose clamps look like a metal ring with square-shaped holes in them and a protruding metal ear, which creates tension on the tubing when crimped. My approach is to try to replace the hose itself. I was able to remove the crimped sleeve by cutting it open using a Dremmel and abrasive disk.