Transmission Control Code P0705 A Step-by-Step Guide to Resolution

The code is telling you that the computer has recognized a failure in the TRS sensor. The sensor is either sending an erroneous or no signal at all to the ... It is completely random when it goes into fault mode. I have been parked, sitting at a light, slowly accelerating, or flooring it and it has gone into fault ... This DTC indicates a problem with the park/neutral position switch and the wire harness in the park/neutral position switch circuit. This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. It will start sometimes, M&S lights blinking, no windows working, turn signals not working and its not shifting out of park. The tsb states that if liquid or corrosion is observed, then the wire harness should be replaced. The dealership did not even ck this on their own. That's a code for a short in the circuit. Check the connections at the trans range switch and the ECM/PCM. If they're fine: Turn the ignition to ... The range sensor is right on top of the transmission. If the hose was leaking on the connector, disconnect and reconnect the connector with ... This is the Transmission Range Sensor TSR located on top of the transmission under the thermostat. Now when I change gear it does rotate as can see the white ... Chrysler 200 & Sebring - Code P0705 Transmission Range Sensor Circuit malfunction (PRNDL Input) - I have a 2002 sebring lxi coupe.