Seat Removal Simplified A Motorless Journey

Do u plan on reusing seat? If not demo seat bottom (remove cover and foam) that might get you better access. last resort is reciprocating ... The key word being "self-resetting", if it isn't then you probably need to replace the entire motor? Do you have memory seats or not?? Refer to ... Just make contact for a second, then try reverse polarity. If the motor is good, it should jerk or operate one of the seat's parts. If you are ... from the car, but my fwd/back motor is dead!! Therefore I can't reach the rear bolts of the seat to remove it....The driver's seat works fine.. No , you can take a wrench and manually wrench the seat forward ( will take a while but it works)... or you can just take a battery and wire up ... You could try applying 12 volts directly to the plug under the seat to get the motor to run. If that doesn't work the following information from ... Depends if you have a power seat or a memory power seat. No need to take anything off at all, just get under the rear of the seat from the rear ... Once off the track, the seat can be lifted up from the front for fairly easy access to the motors. You can be under the seat in 10 minutes. Not ... Pull the cable ends from the motors, take the longest inner cable out (Usually one of the recline cables) and slide it into the cable that moves the seat back ... You will need to have the bottom seat cushion removed to expose the motors. Once exposed you can disengage from the track and slide at will to remove.