Empowering Seat Removal Overcoming Motor Obstacles

But it still is pretty much dead weight. My seats are just four way power. Did you remove the motors? If so am curious how hard the removal was. You will need to have the bottom seat cushion removed to expose the motors. Once exposed you can disengage from the track and slide at will to remove. I didn't try to remove the motors because mine work OK. It sounds like you have a stripped nut. If I were you, I'd just replace the whole frame. If you cant get to the connector and can unplugg it for some reason i would cut the wires to the motor and give it some power directly on the ... Well the motor in the driver seat of my vr4 is dead and i want to ... any ideas on how to remove it if i can't move the seat back and forth? No , you can take a wrench and manually wrench the seat forward ( will take a while but it works)... or you can just take a battery and wire up ... Often you can clear it by having someone in the back seat shove forward with their feet while someone else in the front rocks the seat and works ... Audi 100 / A6 (C4 Platform) - How to remove dead power seat - I am searching but so far not having any luck find a method. There are 2 different ways: 1. Use a socket wrench with a swivel and extension. You must fish for the bolt though. 2. Remove a bolt from mid ... Be prepared to take your time, move the seat forward about 20mm at a time each side, it jams if you move too much to quike. Good luck. Like.