Comprehensive Seat Removal Guide Overcoming Motor Challenges

A6 / S6 (C5 Platform) Discussion - Passenger power seat switch died - how to get seat forward to remove it ... motor due to excessive current if I ... You will need to have the bottom seat cushion removed to expose the motors. Once exposed you can disengage from the track and slide at will to remove. But it still is pretty much dead weight. My seats are just four way power. Did you remove the motors? If so am curious how hard the removal was. Not sure if there is any way to get it out if the seat is slid back. Is the motor burnt out? I had to put a good battery into mine to move ... It is not necessary to remove seat to remove seat motors, it can be done by removing the back seat and lay down where rear seat was and get under seats to ... Be prepared to take your time, move the seat forward about 20mm at a time each side, it jams if you move too much to quike. Good luck. Like. If you get into removing seat for inspection, disconnect the battery and wait about 30 minutes, then you can unplug all of them. Here's a good ... Quite frankly I was amazed there was no death grip type of fastener on plug, just a plain slip in plug. ... If you are keen, why not remove the ... If the Memory Seat Module is linked to the canbus, does this ... I can't even remove the seat to get at the mechanism without moving ... Found a way to do it without power. If you pull the side plastic cover and look towards the front of the frame you will find a square head fitting.