Top Brake Light Woes? Follow Our Expert Troubleshooting Guide

Brake light switch is probably bad or out of adjustment. :cheers: 2006 Dodge Ram SLT Quad Cab 1500 4x2 w/Hemi (MDS) It sounds like the brake light switch at the top of the pedal is either sticking or needs to be adjusted. Fix: There are 2 plastic "stops" that crack over time and these things "snap" into the brake pedal arm to depress the switch. Here are the things I've noticed while researching this issue. Brake light on tail lights work as intended. You press the brake and they light ... So conclusion of my problem above. The whole thing is caused by the printed circuit board inside the light fixture on the left side brake light. the brake light switch is on the firewall under the hood at the rear valve cover.. It is ''Hot'' all the time, key on or off.. or on the treadle ... My 3rd brake light was on, not full bright, but maybe 25-50% of its power. When I apply brake, it came 100% with 2 side brake light and when I release brake ... The most common cause for brake lights not turning off is a stuck brake pedal. If the pedal doesn't come back up all the way when you take your foot off, it ... Bad switch or the tip of the switch needs to be adjusted. Push on the brake pedal and adjust the switch by pushing in. on w212 the switch is ... A faulty brake light switch can cause brake lights to stay on constantly, flicker, or not come on at all. It's easy to replace the brake light switch yourself.