Top Brake Light Troubleshooting Empowering You with Knowledge

The third brake light is on all the time, even after the XC is turned off. I have the check stop lamp message in the display. Any suggestions. Usually, it's the brake light switch. It has a little stopper on it that tends to break and fall off. Look at your floor, can you find it? Pull the tails and check the bulbs, if they are the correct type make sure they are seated correctly and not burned out, if they are LED's take ... Brake lights stay on or brake lights won't turn off? Here's how you fix this annoying issue. Luckily this diy is very easy and straight ... probably something with the brake light switch on the brake pedal. try pulling up on the brake pedal and if the lights go off, then you can ... A common issue on Hyundai cars that can cause the brake lights to stay on is the rubber switch stopper gets brittle and falls off. You may have replaced one of the tail light bulbs with the wrong one. It may be shorting two circuits together. So the brake light stays on. First unplug the switch at the pedal and make sure the light goes off. Assuming it does, push the switch a few times and see if it frees up, and ... Bad switch or the tip of the switch needs to be adjusted. Push on the brake pedal and adjust the switch by pushing in. on w212 the switch is ... Also check for built up dirt under the pedal that is keeping it slightly depressed. There are two brake light switches. One is on the park brake ...