Unleash the Power of Leak-Free Fluid Transfer with the Fumoto Plastic Hose Barb

... tube' using the supplied rubber compression fittings. It seems to me that one would be able to do a more complete oil change by sucking oil ... I use the Fumoto 90 degree plastic elbow, part no. SL-10. ($3) Since ... Also a pair of brass barb connectors to attach the hoses. Fumoto vavles with the short nipple and the snap on coupler ... I did find barbed hose adapters for the M10x1.25 thread, so at least ... ... plastic snap retainer clip fitting holding the lines together. Is ... Fumoto Oil Drain Valve, Drilled CAC Weep Hole thru Support. Save With the plastic drain plug, I doubt there is a Fumoto valve available that would fit the 2.7 or 3.5. Not sure about the 5.0. Dec 14, 2017 | 02: ... The hose method sound just as 'messy' as using a drain pan. The ... Fumoto valve in place of the crankcase plug. If you get the one ... Even the optional elbow fitting looks to drop too low. My solution replaced the OEM drain plug w/ a banjo bolt, w/ the hose fittings coming out ... The extractor works by sliding a thin line down the dipstick tube (and into the pan) and then pumping the vacuum in order to suck the oil out. I have a plastic tube connected to it and a plug in the end of the tube. ... It has a hose fitting on the end and I have a short piece of ... harbor freight has the perfect catch container for oil changes, its cheap, its plastic, it hold a lot of oil. ... hose to it. Turn the