Elevate Your Fluid Management with the Unstoppable Fumoto Plastic Hose Barb

finger around ends of hoses at fitting for seepage. <--- Please fill ... I found a tiny crack in the plastic of the radiator near the drain plug ... I went parts shopping and got a pump, fittings, hose, but no check valves. I did find some 3/4" NPT, but it was going to take 3 bushings and a barb fitting to ... ... tube' using the supplied rubber compression fittings. It seems to me that one would be able to do a more complete oil change by sucking oil ... I used Hydraulic hose fittings ( hose too ) because they are shorter ... Takes 15min to suck five gal from pigtail hose permanently attached to ... ... plastic cover instead of going everywhere. I've seen similar ... Just stick a hose inside and suck out the oil. It's cleaner and gets ... 1) I used a plastic NPT-to-hose-barb adapter from Home Depot. It was ... suck it out of the dipstick tube! Reply 3 · Cafcpete's Avatar. I run a VTA can and just replaced the valve with a hose fitting of the correct threads, boom done. I did it just for simplicity, one less ... It would suck to break that fitting off and lose your oil !! Reply 0 ... I have the Fumoto valve (the one with the lever). 7/8" w ... harbor freight has the perfect catch container for oil changes, its cheap, its plastic, it hold a lot of oil. ... hose to it. Turn the The drain plug on some cars such as the 1.9 Z3, for example, is hidden behind various pieces of plastic undershield, which can take a bit of ...