Solved! Why Your Brakes Are Going to the Floor

The only way fluid levels decreases is by worn brakes (taking more fluid to push worn pads further to make contact puts the fluid in the caliper ... Most common causes are leaking brake line or brake cylinder. Have someone press the brakes while you look under the truck for leaks. No leaks? Pedal going to floor typically sounds like a master cylinder problem. You can pump up the pedal and get a hard pedal. I have to press the brake pedal all the way to the floor to get it to stop. Even then it sounds bad. If i pump it then it kinda slows down but not that much. ... I had the same exact issue, it's the Master Cylinder. It has an internal leak, just get a new one and you'll be good to go. I changed it out a ... Brake pedal goes to floor. How to fix a brake pedal that sinks in your car DIY with Scotty Kilmer. How to replace brake master cylinder. A sinking brake pedal slowly drops to the floor as you exert the same pressure. You'll be able to feel the pedal sinking when you're stopped at a stoplight or ... The brake pedal goes to the floor with very little resistance. It isn't spongy like there is air in the lines. It just goes to the floor if you push it all the ... It sounds like you have an internal leak in your brake master cylinder. With steady pressure the brake pedal should not move, if it does then it ... If the pedal is solid after exhausting the servo system and with the engine stopped - there is no air trapped in the system. It's normal for the ...