Brakes Hitting the Floor? Uncover the Root Causes and Expert Solutions

1. Place something solid behind the pedal so that it does not stroke any more than it would were it not having issues or being soft. When seals in the master cylinder go bad, one day (hopefully not on a downhill offramp) you will press the brake pedal and it just goes down. It ... Either you have air in the brake lines somewhere or the master cylinder is shot. As GBAUTO alluded to, if the master cylinder was allowed to go ... Pedal goes to the floor then has like an inch of actual brakes. Don't see any line leaks, bled them, replaced a wheel cylinder made sure the drums were tight. I'm having an issue with my brakes after the car sat in out in the freezing cold for a week. I went to move it the other day and the pedal went straight to the ... The brake pedal goes to the floor with very little resistance. It isn't spongy like there is air in the lines. It just goes to the floor if you push it all the ... My first guess would be a bad master cylinder, if you don't have an external leak somewhere and if the pedal doesn't begin to "firm up" after ... Could be a bad booster, bad master cylinder, brake lines, wheel cylinders or caliper. It really just depends on what else is going on. You may ... When I push the brake pedal, it goes all the way to the floor on the first push, and then on the second push it goes halfway and the brakes bite properly. If your brake pedal goes all the way to the floor even with a full brake fluid reservoir, it indicates a problem within the brake system itself.