Eradicate the Frustration of Brakes Sinking to the Floor Expert Insights

When seals in the master cylinder go bad, one day (hopefully not on a downhill offramp) you will press the brake pedal and it just goes down. It ... If the pedal is solid after exhausting the servo system and with the engine stopped - there is no air trapped in the system. It's normal for the ... The brake pedal still slowly goes to the floor. It is drivable and stops great, but at a stop light I need to let up and step on the brake pedal a couple of ... If your brake pedal goes to the floor but still stops, you may be using your pads' metal to stop rather than the pads themselves. Do yourself a ... Release it and/or pump it and it comes back to normal. It's usually the result of the piston seal failing, catch it just right and the seal ... A brake pedal that sinks all the way to the floor could indicate a problem with the brake master cylinder or it could be due to a brake fluid leak. It's either a burned out bulb, or it fell victim to something in the creative wiring done by the previous owner (discovered more of that ... If you are positive that there are no leaks (be sure to check all lines, wheel cylinders etc) then the most likely cause will be your master cylinder bypassing ... Sounds like multiple problems going on the way you describe it. Replacing the pads (if that's all he did/ rotors too) really shouldn't have ... Brake pedal goes to the floor. Comments rated to be Good Answers: These comments received enough positive ratings to make them good answers.