Defy Driveline Issues CV Boot Replacement for Inner and Outer Reliability

If you have 8 lugs, you need the 8600 pieces. Last I checked, inner and outer boots are the same for the 8600 trucks. And it was the precision ... Jack car and take tyre off, release steak nut locking device (half shaft retaining nut) with screw driver/chisel and pound hammer taking care ... The CV joint can be very difficult to remove and the wire C clip that secures the joint is often deformed when you remove the joint so you may need a ... The CV axle should have very minimal movement in any direction. If you are able to move the axle more than 1/8 inch in any direction, it is probably time to ... Once you get the CV joint to the bench, clean it out (Preferrably by taking it apart) , regrease it (press lots of grease way inside where ... Just do both boots & re grease. The boot kit should come with the correct grease. The outer CV uses a different grease to the inner, so make sure you get that ... Need to replace the NS inner CV boot ... They will have the parts you require and if you go onto their website you will find parts drawings. Slide steering knuckle off the CV shaft. Remove the heat shield that protects the CV boot (if you don't have a heat shield, that is why you are replacing the ... I need to replace the inner CV joint boot (gaiter) due to damage. Item no. 2 i figure below. I assume the drive shaft will have to removed from the vehicle. ... If you catch the boot leaking, chances are you can just replace the boot if no damage has internally occurred. In this video, the CV axle is ...